Should you upgrade to the Micro Swiss Hotend Kit for 3D printing?

All-time reply: The all-metallic hotend from Micro Swiss is an essential upgrade to any mk10 extruder, peculiarly the Monoprice Maker Select v2.one and Plus.

Amazon: Micro Swiss MK10 All Metal Hotend ($38)
Amazon: Monoprice Maker Select Plus ($310)

It allows you lot to utilize loftier-temperature filaments

TPU isn't the only filament that the all-metal hotend from Micro Swiss helps you use. Polyethylene terephthalate (PetG) and High-Temperature Polylactic acid (HTPLA) both require temperatures above the tolerance level of the PTFE tube.

You can go away with a few prints at actually loftier temperatures, 235 degrees Celsius or more than, but you'll very chop-chop see the stock nozzle start to fail. The Micro Swiss nozzle, notwithstanding, is custom made to handle these temperatures and these filaments.

It removes a failure point

Having an all-metal hotend removes the Polytetrafluoroethylene (PTFE) tube that normally protects your filament, which tin can burn or snag on the wall of an unprotected nozzle.

Because of the manufacturing process behind the Micro Swiss hotend — the hotend is polished to a sheen making information technology polish and snag-free — yous can remove the PTFE tube entirely and no longer accept to replace information technology every 100 prints or and then.

It has amend heat exchange

One of the most of import processes when it comes to your hotend is making sure the heat is just at the nozzle. The Micro Swiss has excellent rut exchange that keeps the whole pharynx cool while maximizing the oestrus at the tip of your nozzle.

This is especially important when using more than exotic filaments like Thermoplastic polyurethane (TPU). TPU is a type of flexible filament that tin brand rubbery models like phone cases. Because information technology'southward already flexible information technology is of import that no heat soften it's before it extrudes otherwise you will accept a mess on your hands.

It works on a lot of printers

Micro Swiss has made sure that its hotend and the conversion kit work with as many printers as possible. Most of the list are clones of the original i3 Prusa only it also works on the clones of the Replicator one. Here is a full list:

FlashForge Creator Pro
FlashForge Creator X
FlashForge Dreamer
QIDI TECH I
Dremel Idea Architect
PowerSpec 3D Pro
PowerSpec 3D X
PowerSpec Ultra 3D Printer - Wanhao Duplicator 4S
Wanhao Duplicator 4X
Wanhao i3
Monoprice Maker Select 3D Printer v2
Monoprice Maker Select Plus
Cocoon Create 3D Printer

You can also buy specific kits for other printers with special cooling blocks like the Monoprice Maker Ultimate. Amazon sells a broad range of Micro Swiss to suit your needs.

Our pick

Micro Swiss MK10 All Metal Hotend

An essential upgrade

The Micro Swiss is an essential upgrade for well-nigh any Mk10 print head. Having ane extends the capabilities of your 3D printer beyond its original purpose, pushing it to the max.

3D Printer

Monoprice Maker Select Plus

Affordable excellence

For a relatively cheap price, the Maker Select Plus is a fantastic starting betoken for 3D printing. With just a few upgrades like the Micro Swiss hotend, you lot tin be printing the aforementioned quality for a fraction of the price of higher-end printers.

We may earn a committee for purchases using our links. Learn more.